Seal Ends Once™ High Solids End Sealer for All Wood

Available in 32 oz can (1 Quart)

A Nano-Tech water based penetrating sealer that prevents water absorption of the ends and cuts of all lumber including green logs. Seal Ends Once protects against end checking and splitting. Most problems on decks and log homes stem from moisture ingress that causes checking and splitting.

Uses: or use on all soft and hardwoods including Cedar, Ipe, Pressure Treated, Mahogany, Camaru, Bamboo, Timbersil, Redwood, Tigerwood and Fir. Seal Ends Once helps to stabilize the wood preventing cupping and twisting.

Benefits of Seal Ends Once™

• Zero VOC's, non-toxic and safe for the environment
• Contains no Wax or chemicals
• Superior penetration and long lasting
• Waterproofs and protects against mold and mildew
• Can be used over water
• Non film forming
• Paintable and Stainable
• Will not harm humans, plants or animals
• Easy soap and water cleanup
• 10-year warranty
• Squeegee applicator bottle makes it easier than ever to apply

Application & Coverage

• Apply two liberal, even coats of Seal Ends Once with squeegee to wood end grain. When applying directly from quart can, apply by spray or brush — do not roll.
• Do not use if air or surface temperature is below 35°F.
• Do not apply in rain or when rain is imminent.
• DO NOT THIN. Apply two liberal, even coats of Seal Ends Once™ with squeegee to wood end grain. Apply second coat as soon as the first coat enters the wood and is still damp.
• Approximate coverage is 5 sq/ft at two coats. Coverage rates were based on soft pine wood end samples. Coverage rate will increase on dense and harder woods.
• Quart Refill covers approximately 38 sq/ft at two coats. When applying directly from quart can, apply by spray or brush — do not roll. Gallons available upon request.