Rubio Monocoat Creative Effects | Fumed

Rubio Monocoat Fumed was developed to create a greying effect for oak wood without causing harmful or irritating vapors.
Reactive Treatments react naturally with tannins normally found in Oak, Ash and some other species.
Available in the following sizes: 1 L bottle, 5 L jerry can

Purchase

Rubio Monocoat Creative Effects | Fumed

Click to enlarge

Description

Rubio Monocoat Tannin Reactive Stains - FUMED

Rubio Monocoat Fumed reacts with tannins normally found in Oak, Ash an some other wood species and mimics the fumed effects without the harmful chemicals. Since this product reacts in accordance to the amount of tannic acid that is present in the wood, Fumed allows for the creation of very unique and personalized effects and is therefore highly variable

Monocoat Fumed Floor Finish is eco-friendly and does not release any toxic or irritating fumes or vapors.

Designed to be post-treated with an RMC Oil.

Specific Characteristics

  • Provides a "graying" effect to the wood
  • Reacts to the tannic acid that is naturally present in the wood
  • Releases no toxic fumes or vapors
  • Should always be finished with a Rubio Monocoat Oil so that an optimal molecular binding of the product with the wood is guaranteed
  • Can be diluted with water if the concentration is too high for your liking
  • Can be applied both manually and industrially (see instructions below)
DEPENDING ON THE METHOD OF PREPARATION AND THE TYPE OF WOOD: +/- 175 TO 350 SQ. FT./LITER.


Directions for Manual Application

  • Sand the planks until the desired effect has reached
  • Remove any dust
  • Apply RMC Fumed regularly using a roller or a brush. If a smooth effect is required saturate the surface completely with the product.
  • Let the surface dry completely (12 to 48 hours)
  • Sand the surface lightly with a polisher equipped with a beige pad
  • Remove any dust again
  • Finish with Rubio Monocoat Oil

Directions for Industrial Application

  • Sand the planks until the desired effect has reached
  • Remove any dust
  • Apply RMC Fumed regularly using a roller or a spray gun. If a smooth effect is required saturate the surface completely with the product.
  • Let the surface dry completely – to the air, with a drying tunnel or UV drying
  • Sand the surface lightly with a brush sanding machine, flutter or nylon.
  • Remove any dust again
  • Finish with Rubio Monocoat Oil

Product Reviews

Please Login or Register to write the first review.
Copyright 2019 Greenhome Solutions LLC. All Rights Reserved. Site Map | Terms + Conditions | Privacy Policy

E-Commerce Website Design by Ryan Design Studio