Rubio Monocoat Oil Plus 2C - Component A

Natural Oil Finish 2C - Part A Only (no accelerator part B)
Wood is colored via molecular binding and protected in one single layer, while keeping the wood's natural appeal
Available in the following sizes: 275 ml and 1 L


Price: $49.00
Product ID: opcolor_100ml
Rubio Monocoat Oil Plus 2C - Component A

Click to enlarge


Natural Oil Finish 2C Part A (no accelerator B)

Monocoat Oil Plus 2C Part A is useable without mixing with the Part B Accelerator. This Rubio Monocoat natural oil finish is blended to accept the accelerator and a nice benefit of this blend is a harder oil that adds more durability to the finish, even when used without the accelerator. The application procedure, dry time and cure period is exactly the same as with the standard Oil Plus.

Although Part A is available without the accelerator, we strongly recommend the use of the component system - Monocoat Oil Plus 2C Parts A & B- since the Rubio Monocoat natural oil finish will cure in 7 days rather than 21 days, virtually eliminating spotting, scuffing, etc. during the cure period.

Benefits / Features

  • Molecular bonding with the wood: durable protection!
  • Enhances the natural look of the wood, keeping its natural appeal
  • Natural, plant-based ingredients / non-toxic / NO VOC's
  • Respects the natural look and feel of the wood
  • Low consumption - 1 liter for 300 to 500 sq. ft.
  • No starting marks or overlaps
  • Easy to maintain
  • Doesnʼt contain water or solvents
  • Applies to all kinds of wood, including furniture and floors (solid wood, veneer wood, MDF, etc.)
  • Durable protection, highly resistant to wear
  • Water-resistant: (suited for kitchens, bathrooms)
  • Resistant to heat up to 212 ºF

Oil Plus 2C Finishes - Consumption rate for 1.3 Liter cans:

HARDWOODS Pure Oil - 1.3L / 650 sq ft.
Color Oil - 1.3L / 455 sq ft.

SOFTWOODS Pure Oil - 1.3L / 520 sq ft.
Color Oil - 1.3L / 390 sq ft.

DOUGLAS FIR & RECLAIMED WOODS Pure Oil - 1.3L / 290 sq ft.
Color Oil - 1.3L / 227 sq ft.


Thanks to their molecular bonding technology, consumption of oil is much lower than a traditional oil, wax or varnish. And results in a durable color and protection in one single layer. Once the oil adheres to the upper microns in the wood by a strong molecular bond, the wood doesn't absorb any surplus product which means a second layer isn't necessary. This also ensures a finish without lap lines (NO OVERLAPS!)


The RMC technology creates a durable, long lasting protection. It's important to allow the reaction time of 3-5 minutes for the oil to adhere. The better the fibers are bonded, the stronger the protection will be.


Monocoat Natural Oil Finish is the leading plant-based, environmentally responsible, sustainable, non-polluting, single-coat, durable wood finish. Monocoat contains 0% VOCs and has no effect on indoor air quality.


  • Formaldehyde
  • Ammonia
  • Acetone
  • Solvents
  • Preservatives
  • Odor-masking agents
  • Chemical residuals
  • Heavy metal drying agents: Arsenic, Beryllium, Chromium, Cadmium, Nickel, or Lead
For clean-up of hands and accessories simply use warm water and soap.

Application Instructions

Application Instructions [PDF | 500 KB]

Product Reviews

Please Login or Register to write the first review.
Copyright 2020 Greenhome Solutions LLC. All Rights Reserved. Site Map | Terms + Conditions | Privacy Policy

E-Commerce Website Design by Ryan Design Studio