Rubio Monocoat Creative Effects | Smoke

Rubio Monocoat Smoke creates a smoked brown effect on oak wood without releasing toxic fumes.
Reactive Treatments react naturally with tannins normally found in Oak, Ash and some other species.
Available in the following sizes: 1 L bottle, 5 L jerry can

Purchase

Rubio Monocoat Creative Effects | Smoke

Click to enlarge

Description

Rubio Monocoat Tannin Reactive Stains - SMOKE

Monocoat Smoke has been especially developed to provide a  smoked aspect to oak wood (or any other tannic acid-containing types of wood), without any hazardous or irritating vapours being released. This product reacts to the amount of tannic acid that is present in the wood, and is therefore highly variable.  The treatment allows you to create very unique effects since the darkness of the aging depends on the amount of tannin in the wood.
The result varies between a shade of copper and brown. Every project becomes unique and personalized.

Monocoat Smoke is eco-friendly and does not release any toxic or irritating fumes or vapors. The product is designed to be post treated with an RMC Oil.

Specific Characteristics

  • Provides a similar effect as smoking with ammonia
  • Reacts to the tannic acid that is naturally present in the wood
  • Environmentally friendly, releases no toxic fumes or vapors.
  • Should always be finished with a Rubio Monocoat Oil so that an optimal molecular binding of the product with the wood is guaranteed
  • Can be diluted with water if the concentration is too high for your liking
  • Can be applied both manually and industrially (see instructions below)
DEPENDING ON THE METHOD OF PREPARATION AND THE TYPE OF WOOD: +/- 175 TO 350 SQ. FT./LITER.


Directions for Manual Application

  • Sand the planks until the desired effect has reached
  • Remove any dust
  • Apply RMC Smoke regularly using a roller or a brush. If a smooth effect is required saturate the surface completely with the product.
  • Let the surface dry completely (12 to 48 hours)
  • Sand the surface lightly with a polisher equipped with a beige pad
  • Remove any dust again
  • Finish with Rubio Monocoat Oil

Directions for Industrial Application

  • Sand the planks until the desired effect has reached
  • Remove any dust
  • Apply RMC Smoke regularly using a roller or a spray gun. If a smooth effect is required saturate the surface completely with the product.
  • Let the surface dry completely – to the air, with a drying tunnel or UV drying
  • Sand the surface lightly with a brush sanding machine, flutter or nylon.
  • Remove any dust again
  • Finish with Rubio Monocoat Oil

Product Reviews

Please Login or Register to write the first review.
Copyright 2019 Greenhome Solutions LLC. All Rights Reserved. Site Map | Terms + Conditions | Privacy Policy

E-Commerce Website Design by Ryan Design Studio